Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

Transient transition behaviors of fractional-order simplest chaotic circuit with bi-stable locally-active memristor and its ARM-based implementation

This paper proposes a fractional-order simplest chaotic system using a bi-stable locally-active memristor. The characteristics of the memristor and transient transition behaviors of the proposed system are analyzed, and this circuit is implemented digitally using ARM-based MCU. Firstly, the mathematical model of the memristor is designed, which is nonvolatile, locally-active and bi-stable. Secondly, the asymptotical stability of the fractional-order memristive chaotic system is investigated and some sufficient conditions of the stability are obtained. Thirdly, complex dynamics of the novel system are analyzed using phase diagram, Lyapunov exponential spectrum, bifurcation diagram, basin of attractor, and coexisting bifurcation, coexisting attractors are observed. All of these results indicate that this simple system contains the abundant dynamic characteristics. Moreover, transient transition behaviors of the system are analyzed, and it is found that the behaviors of transient chaotic and transient period transition alternately occur. Finally, the hardware implementation of the fractional-order bi-stable locally-active memristive chaotic system using ARM-based STM32F750 is carried out to verify the numerical simulation results.     

Micro-pinch formation and extreme ultraviolet emission of laser-induced discharge plasma

Extreme ultraviolet(EUV) source produced by laser-induced discharge plasma(LDP) is a potential technical means in inspection and metrology. A pulsed Nd:YAG laser is focused on a tin plate to produce an initial plasma thereby triggering a discharge between high-voltage electrodes in a vacuum system. The process of micro-pinch formation during the current rising is recorded by a time-resolved intensified charge couple device camera. The evolution of electron temperature and density of LDP are obtained by optical emission spectrometry. An extreme ultraviolet spectrometer is built up to investigate the EUV spectrum of Sn LDP at 13.5 nm. The laser and discharge parameters such as laser energy, voltage, gap distance,and anode shape can influence the EUV emission.     

Identifying a perovskite phase in rare-earth nickelates using X-ray photoelectron spectroscopy

We demonstrate a practical way to identify the presence of a perovskite phase in rare-earth nickelates (RNiO₃) using X-ray photoelectron spectroscopy (XPS). By varying the calcination temperature, we prepared RNiO₃ powders with different degrees of chemical reaction. We found that perovskite RNiO₃ becomes predominant after high-temperature calcination (≥1,000 °C) in X-ray diffraction and XPS (at Ni 3p and O 1s edges) measurements. While the observed spectra at the Ni 3p edge are similar for all powders, a sizable difference was observed in the O 1s-edge spectra depending on the calcination temperature. With the formation of a perovskite phase with a trivalent Ni³⁺ state, an XPS peak corresponding to oxygen ions in the perovskite lattice distinctly emerges. Our work shows that the Ni³⁺ state cannot be determined by analyzing the Ni 3p edge solely and rather, the O 1s edge should be simultaneously monitored for explicit identification.     

AgAlSe2晶体高压相变的第一性原理研究

基于密度泛函理论,采用广义梯度近似法,研究了黄铜矿结构AgAlSe₂在高压下的晶体结构、晶格动力学稳定性与电子结构.结果显示:在0 GPa时AgAlSe₂的晶格参数与实验值吻合,在13.9 GPa附近,质量密度、Se-Ag键长、Se-Al键长、晶格常数a突然增大,相对晶胞体积V/V₀、晶格常数c突然减小,声子谱出现虚频,结构变得不稳定,带隙发生突变,数值呈减小趋势.表明AgAlSe₂晶体在13.9 GPa附近发生结构相变.该研究为AgAlSe₂晶体在理论上所能承受的高压提供信息支撑.     

High-temperature fluorescence of low- and high concentration aqueous ATP solution

Abstract

The results of an experimental study of luminescence of an aqueous solution of adenosine triphosphate (ATP) at room temperature are presented. High-temperature fluorescence of low- and high-concentrated solution was experimentally detected and analyzed. The shape of the fluorescence spectrum, the excited state lifetime and the temperature behavior of the emission intensity indicate the formation in the high-concentrated solution of rather stable dimer-like complexes, which can form excimer states.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Generalized gradient approximation adjusted to transition metals properties: Key roles of exchange and local spin density

Perdew-Burke-Ernzerhof (PBE) and PBE adapted for solids (PBEsol) are exchange-correlation (xc) functionals widely used in density functional theory simulations. Their differences are the exchange, μ, and correlation, β, coefficients, causing PBEsol to lose the Local Spin Density (LSD) response. Here, the μ/β two-dimensional (2D) accuracy landscape is analyzed between PBE and PBEsol xc functional limits for 27 transition metal (TM) bulks, as well as for 81 TM surfaces. Several properties are analyzed, including the shortest interatomic distances, cohesive energies, and bulk moduli for TM bulks, and surface relaxation degree, surface energies, and work functions for TM surfaces. The exploration, comparing the accuracy degree with respect experimental values, reveals that the found xc minimum, called VV, being a PBE variant, represents an improvement of 5% in mean absolute percentage error terms, whereas this improvement reaches ~11% for VVsol, a xc resulting from the restoration of LSD response in PBEsol, and so regarded as its variant.     

Intramolecular orbital engineered hetero bimetallic Ce-Fe MOF with reduced transition energy and enhanced visible light property

A structurally stable, 3d-4f heterometallic coordination polymer has been solvothermally synthesised and evaluated for its accomplished materials properties. The light absorption activity in the visible band was higher for unique Ce-Fe MOF than that of the homometallic Ce-MOF or Fe- MOF. The intimate overlap of two different metal clusters in heterometallic environmental induced the formation of low line conduction orbital, which ultimately lowered the transition energy. The heterometallic acquired an additional sensitisation from a Fe-μ3-oxo cluster that had vibrantly enhanced the light uptake activity. The vacancy created in the 6s, 5d orbital of Ce in Ce-Fe MOF contributed to the photo-excitation of electrons and reduced the recombination time. This distinct intramolecular arrangement assisted the exciton trapping characteristic. Also, the presence of multiple metal cores in the framework aided to confine the increased number of excitons for a redox reaction. The solar photocatalysis study with acetaminophen revealed these improved materialistic features by degrading it 94.6% with a rate constant of 0.0137 min⁻¹. The recycle studies confirmed the robust stability of the synthesised MOF.     

Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.